All the process is based on importing/exporting data through the CGATS file format.
On Coraye create your target following the process described in Creating a media profile. But this time, instead of directly clicking on "Next" button, click on "Export Barbieri".
You should then have a ti1 file that is indeed a CGATS file. You can rename it to .txt instead of .ti1.
Browse to select the CGATS file created by Coraye
Select the Barbieri spectrophotometer model and the paper size to print the chart .
Click on "Save Target" to create the chart and associated data.
Data and Chart to print are stored into the "Target" folderThe default path is ../User/.../Documents/Barbieri/Gateway/Chart/Targets/
Follow the tutorial : Printing Chart
Launch the Gateway Software and create a new job
Click on the "Customised" folder
Select the Barbieri target created previously with "Chart Generator".
Define the measurement settings
Define the file settings
When the job was created, double click on it to start the reading procedure.
Check the chart definition
Check the measurement settings
Install the holder with the printed chart on the Barbieri spectrophotometer.
Clic "Start" to start the measure.
At the end of measurement, measured Data are stored into the "Measurements" folder
The default path is
You can access to this folder with the "Browse..." button.
Coraye use the .cie CGATS files to create an ICC profile.
Now click on "Import a reading" into the Calibration or Characterization procédure and browse to get the CGATS file created by The Gateway software (.CIE)