Barbieri LFP qb Sensing Unit
Last updated
Last updated
Spot measurement The spectral unit can be detached from the platform to use it as a manual device for spot measurements. Switch off platform and detach the spectral unit by releasing the button on the back side of the spectral unit.
Switch on spectral unit by pressing the button on back side. The display will show the following content: The "Calibrate device" button performs an automatic calibration of the device by automatically inserting the internal reference white and performing calibration.
Coraye gives you the possibility to connect your Barbieri LFP spectrophotometer via the USB port or via the Wi-Fi network connection. First of all, make sure that the Barbieri plugin is installed and that the Sensing Unit is turned on.
When your Barbieri LFP qb Sensing Unit is connected via usb, it will be detected and displayed at the top right in the Coraye window. You won't have to do anything else.
If you choose to connect your Barbieri LFP qb Sensing Unit to a network via a WIFI connection, you must enter its IP address.
First step: Retrieve the IP address of the Sensing Unit: Press the "Settings" cogwheel to access the WI-FI icon.
Click on the "Wi-Fi" icon
The IP address appears on the screen
The Wi-Fi parameters are configurable by clicking on the "device to WLAN" button
Second step: transfer the IP address in Coraye
Click on the "Enable network instrument detection" button located at the top right of the Coraye window
In the window that appears, type the IP address of the Barbieri LFP Sensing Unit (Ex: 192.168.1.27) then select the model of the spectrophotometer (In our example: Spectro LFP qb unit). Click on the "Validate" button
Congratulations your Barbieri Sensing Unit is ready to use
To measure color samples, press the "Measure" button on the touchscreen of the Sensing Unit.
The colors will appear in the Coraye window
The use of the "Color capture" module is detailed in the "Color capture" tutorial:
